ATTENTION: Due to variances in manufacturing tolerances for base firearms some slides may require fitting. We recommend to have a competent gunsmith evaluate your parts for fitment for your safety.
NP10C R2 Special Order Overview:
Craft your slide to meet your tactical needs! Our Special Order process allows you to configure the slide model, optic cut, and coating finish to complete your perfect firearm! Just make a few easy selections with our form and let us do the rest! Within the estimated lead time, we can create your perfect slide made to your custom specifications. All our slides are machined from 17-4 Precipitation Hardened Stainless Steel solid billet right here in Las Vegas, NV. Get yours started today!
Pro Tip: Special orders that match a stock configuration will be fulfilled first before placing stock online. This is the best way to get a stock slide reserved instead of waiting for a stock refresh that may not come.
Model:
This is where you choose the design that best meets your needs. We offer a wide range of models that blend functional features into attractive, precision machined designs. For additional information on each model click here to see their respective web pages.
Optic Milling:
We machine the optic cut directly onto the slide without the need of an adapter plate. Please consider this choice carefully as this decision is not reversible once the slide has been milled to that specification. Using different optics on footprints than the ones specified below is at your own discretion and compatibility is not guaranteed.
The following is applicable for all mounting footprints unless stated otherwise:
- All mounting footprints are placed in front of the rear dovetail
- Optic cut depths have been engineered to provide a lower 1/3rd co-witness with optics ready suppressor height sights
- All mounting footprints do not require an adapter plate or sealing plate to mount the optic. Sealing plates or shrouds are still recommended for use by the optic manufacturer for intended applications.
None: No optic cut will be milled onto the slide. Sight mounting features will still be in the factory location. Please note that we will not re-cut an optic cut into the slide once it has been heat treated and hardened.
Aimpoint Acro: Slide will ship with the specific rail feature to mount the Aimpoint Acro C-1, C-2, P-1, or P-2 optics directly to the slide with the included optic hardware. The Steiner MPS can be used on this footprint but there will be a gap from the front of the footprint to the MPS. This footprint is not compatible with the Holosun 509T.
Holosun 407C/507C/508T: Slide will ship ready to mount those optics directly. Please use the proprietary screws that Holosun provides with the optic. This footprint is our default option for stocked slides so be sure to check our online store inventory before placing a special order with this option to avoid an unnecessary lead time.
Holosun 407K/507K/RMSc Shield: Slide will ship ready to mount those optics directly. Please use the screws that come with the optic.
Holosun 509T: Slide will ship with the specific rail feature to mount the 509T directly with recoil stop slot. This footprint is not compatible with the Aimpoint Acro footprint; the Acro rail is much thinner.
Trijicon RMR: Slide will ship ready to mount the Trijicon RMR or SRO. This footprint is identical to the Holosun 507C footprint but we include special mounting screws for use with the Trijicon optics. This footprint is our default option for stocked slides so be sure to check our online store inventory before placing a special order with this option to avoid an unnecessary lead time.
Slide Finish:
We offer a variety of different options for finishing/coating your slide after it has been milled. Please review the following options to see which best meets your tactical needs.
Unfinished (Media Blasted): Select this option if you wish to get it coated from another vendor. We media blast the slide with a roughness to make it ready for coating. The slide will be shipped in an unfinished state not ready for operation. It is inadvisable to use the slide in this condition and may void your warranty if issues occur.
Black DLC: Slide will arrive with a coated solid black Diamond-like Carbon finish.
Battle Hardened Black DLC: Slide will arrive with our distressed black DLC finish with highlighted edges.
Titanium Carbon-Nitride (TiCN Copper): Slide will arrive coated with a satin copper finish. This coating is not as durable as the black, gold, or gray coatings and will show wear sooner.
Titanium Nitride (TiN Gold): Slide will arrive coated with a satin gold finish.
Chromium Nitride (CrN Gray): Slide will arrive coated with a satin gray finish.
Satin Stainless Steel: Slide will arrive with a semi-polished, non-directional soft satin stainless steel finish (uncoated). Low reflectivity and a clean, uniform look set this premium finish apart from others while maintaining cosmetic longevity. Frequent cleaning and lubrication are required for this finish since there is no coating.
Cerakote: All other colors not identified above are achieved through Cerakote. Slide will arrive with a single color Cerakote coating of your choice offering unmatched corrosion, chemical and durability performance.
Norsso standard slide features:
- Made with 17-4 Precipitation Hardened Stainless Steel
- Includes (2) shortened extractor roll pins for use with optic cut slides; the factory one will be too long for an optic cut slide.
- Stripped slide only; sights, optics, or other accessories shown are not included with purchase
For shipping/returns/warranty information click here. For special order policy information click here.
