Rolling stock updates this week! See if your slide is back in stock!

phone: 702.625.2001

Hardware

7 of 7 Items
  • Norsso Trijicon RMR Cut Replacement Screws

    Norsso Trijicon RMR Cut Replacement Screws

    Made with Black-Oxide Alloy Steel, these replacement screws are the ideal height for mounting the Trijicon RMR and Trijicon SRO to our slides. Using too long of a screw on the right side mount hole will cause malfunctions. One order includes a pack of...

    $2.99
    Add to Cart
  • Norsso Optic Cover Plate Replacement Screws

    Norsso Optic Cover Plate Replacement Screws

    Replacement mounting screws compatible with the following Norsso Cover Plates: - NGLK-ELRMR-PLT - N320-RMR-PLT - N43-507K-PLT - NP10C-RMR-PLT Includes two M3 x 0.5 Thread 6mm long flat head screws. Socket head drive size is 2mm Hex.

    $2.99
    Add to Cart
  • Norsso Vortex Cut Replacement Screws

    Norsso Vortex Cut Replacement Screws

    Replacement screws compatible for mounting the Vortex Venom or Viper to a Norsso aftermarket slide. Includes two #6-32 thread 5/16" long socket head cap screws. Socket drive head size is 7/64" Hex.

    $2.99
    Add to Cart
  • Norsso N365/365XL Cover Plate Replacement Screws

    Norsso N365/365XL Cover Plate Replacement Screws

    Replacement mounting screws compatible for our N365/365XL optic cover plates. Use of medium strength thread locker torqued to 15in-lbs is recommended. Includes two M3 x 0.5 5mm long Flat Head Hex Drive Screws. Socket head drive size is 2mm Hex.

    $2.99
    Add to Cart
  • Norsso SCS Cut Replacement Screws Norsso SCS Cut Replacement Screws Norsso SCS Cut Replacement Screws

    Norsso SCS Cut Replacement Screws

    Replacement screws compatible for mounting the Holosun SCS to a Norsso SCS Cut aftermarket slide. Includes two M3-0.5 thread 6mm long flat head torx screws. Drive size is Torx T10. Holosun recommended torque for mounting is 15 lb-in with medium/blue...

    $2.99
    Add to Cart
  • Mounting Screws for Holosun 509T

    Mounting Screws for Holosun 509T

    Screws required to mount the 509T adapter plate to a Norsso aftermarket slide with a Trijicon RMR/Holosun 507C Optic cut. The shortened length is required to prevent interference with the extractor depressor rod bore. Includes three 6-32 x 3/16" Length...

    $3.99
    Add to Cart
7 of 7 Items

© 2024 NORSSO All rights reserved. | Sitemap