N26/27 Special Order Option
Special orders allow you to mix and match the slide model, optic cut, and coating finish to fit your tactical needs. Form your perfect slide with the drop-down menus above and let us do the rest! Please allow us 6-8 weeks to get your slide made to your custom specifications. For additional information on each model click here to see their respective web pages.
Optic Milling Options:
None - No optic cut. Sight dovetail in factory location.
Trijicon RMR - This is available with the dovetail in factory location or in front of the optic (Reverse dovetail). Indexing posts allow for consistent zeroing when removing and reinstalling the optic. We set our co-witness sight picture for lower 1/3, providing additional thread engagement to secure the optic onto the slide. It also allows you to see more of the optic window. Absolute co-witness can be achieved with taller sights if so desired.
Vortex Viper and Venom - Indexing posts are used for these optics to maintain sight zero if removed. The Venom optic is larger than the Viper. It requires the dovetail to be moved from the factory location to be in front. The Viper is installed in the conventional location or can be reversed depending on application. These optics are setup with lower 1/3 co-witness.
Leupold Delta Point Pro - This milling option removes the rear dovetail. For co-witnessing with this setup you'll need the Delta Point Pro rear sight and the Ameriglo .407" front. Part number is GST 407.
Unfinished - Slide will arrive uncoated and media blasted. Ideal for those seeking cerakote or a custom coating. Unfinished slides may have a reduced lead time.
Black DLC - Slide will arrive with a black DLC coating. Our coating of choice for low friction and wear resistance.
Battle Hardened - Black DLC base with weathered edges. Provides a battle hardened look on the slide. See example picture above.
Norsso standard slide features:
- Made with 17-4 Precipitation Hardened Stainless Steel
- Special optic mount screws included (applies for RMR, Romeo 1, and Vortex cuts only)
- Stripped slide only; sights, optics, or other accessories shown are not included with purchase
- Complimentary channel liner installed for finished slides; attached separately for unfinished slides.
Order a set of internals with your slide and our expert staff will install them for free!
DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
- Made to Order:
- 6-8 weeks estimated delivery
perfect product, super nice on my Glock 27, I recommend it 100%
Quality is noticeable right out of the box. Put my RMR on it and put 200 rounds through it with zero issues. The look is amazing!
Awesome product!! Came faster than anticipated and looks even better in person. Fit and finish are top notch. Highly recommend this product to anyone debating glock slides.
It nothing short of amazing the quality and design are flawless. It's worth every dollar spent
Ordered a G26 Reptile with RMR cut in distressed finish. Turn around time was great. The best looking slide work in my opinion. Functions great. Will be ordering a G19 slide in the future for sure.
I ordered a G27 slide with Gripper machining, no RMR cut and the "battle hardened" (distressed nitride finish); it arrived yesterday. The machining was quite good; the outside surfaces looked impeccable, and I had to search very hard to find any tool marks inside some of the deep, high-aspect-ratio holes (e.g. extractor plunger channel). I really like the distressed nitride treatment. All of the slide parts, with the exception of the sights (which I haven't installed yet) went in smoothly and easily. It was a little tight on a Polymer80 frame, but no obvious hangups or glitches when cycling. Snap caps cycled just fine; looking forward to taking it to the range.
I ordered a custom Gen 5 Glock 26 Reptile slide with an RMR cut. Not only was the turn around time super quick, the slide was incredible. It far exceeded my expectations with the look, function & quality. The Battleworn finish Just sets it off as well. Great job Norsso. My G19 is next when I can get some spare change in!