P320 9mm Compact Special Order Slide

N320 9mm Compact/Carry (3.9" Barrel length) Slide Special Order Overview:

Craft your slide to meet your tactical needs! Our Special Order process allows you to configure the slide model, optic cut, and coating finish to complete your perfect firearm! Just make a few easy selections with our form and let us do the rest! Within the estimated lead time, we can create your perfect slide made to your custom specifications. All our slides are machined from 17-4 Precipitation Hardened Stainless Steel solid billet right here in Las Vegas, NV.

Pro Tip: Special orders that match a stock configuration will be fulfilled first before placing stock online. This is the best way to get a stock slide reserved instead of waiting for a stock refresh that may not come.

Model:

This is where you choose the design that best meets your needs. We offer a wide range of models that blend functional features into attractive, precision machined designs. For additional information on each model click here to see their respective web pages.

Optic Milling:

We machine the optic cut directly onto the slide without the need of an adapter plate. Please consider this choice carefully as this decision is not reversible once the slide has been milled to that specification. Using different optics on footprints than the ones specified below is at your own discretion and compatibility is not guaranteed.

The following is applicable for all mounting footprints unless stated otherwise:

• All mounting footprints are placed in front of the rear sight dovetail (irons back), unless the option says "Reverse Dovetail" (irons forward), or other modifiers
• All mounting footprints do not require an adapter plate to mount the optic. Sealing plates or shrouds are still recommended for use by the optic manufacturer for intended applications.

Additional info on optic cut mounting holes, iron sight recommendations, and other notes can be found on this webpage here. 

https://norsso.com/pages/sig-p320-chart.html

None: No optic cut will be milled onto the slide. Iron sight dovetails will still be in milled into the slide unless specified otherwise. Please note that we will not re-cut an optic cut into the slide once it has been heat treated and hardened.

Aimpoint Acro/Steiner MPS: Slide will ship with the specific rail feature to mount the Aimpoint Acro C-1, C-2, P-1, or P-2 optics directly to the slide with the included optic hardware. The Steiner MPS can be used on this footprint but there will be a gap from the front of the footprint to the MPS. This footprint is not compatible with the Holosun 509T.

Holosun 509T: Slide will ship with the specific rail feature to mount the 509T directly with recoil stop slot. This footprint is not compatible with the Aimpoint Acro footprint; the Acro rail is much thinner.

Leupold Deltapoint Pro: Slide will ship ready to install the Deltapoint Pro. This option includes the 4 corner locating posts and is not compatible with the Romeo 1 Pro or RomeoX Pro. Unique to this cut is the removal of the rear dovetail to allow space for the Deltapoint Pro’s rear sight attachment. Suppressor height sights are not tall enough to co-witness with this optic. Co-witnessing is achieved by using the DeltaPoint Pro rear iron sight and a Dawson precision .455" tall front sight, Part # 021-543.

RMSc Shield/Holosun 507K/EPS Carry*/RomeoX Compact: Slide will ship ready to mount those optics directly. For the Holosun optics, you may have to shorten the right-side optic mount screw as they could be too long and will run into the plunger rod.

RomeoX Pro/Romeo2/Holosun SCS320: Slide will ship ready to mount the RomeoX Pro (not compact) and the Holosun SCS320, includes the rear dovetail for co-witnessing with the optic. Please use the M4 screws that are provided with the optic to mount to the slide. For the Romeo2, you’ll need taller than suppressor height sights, .455” front, .440” rear height will work (we do not carry these).

Trijicon RMR/Holosun 507C: Slide will ship ready to mount those optics directly. Please use the short set of screws provided with the optic. This footprint is our default option for stocked slides so be sure to check our online store inventory before placing a special order with this option to avoid an unnecessary lead time.

Trijicon RMR/Holosun 507C Reverse Dovetail: Same as the normal Trijicon RMR cut but with the iron sight dovetail in front of the optic, or in an irons forward arrangement.

Trijicon RMRcc: Slide will ship ready to mount the Trijicon RMRcc, not the standard size RMR. This footprint is unique and will only work with the Trijicon RMRcc.

Trijicon SRO, Rear shift (no rear irons) – Slide will ship ready to mount the Trijicon SRO. This cut has the rear sight dovetail removed to allow a rearward shift of the optic cut, allowing the front of the optic to remain behind the breech face. With proper extraction, this eliminates the brass from being ejected into the optic.

Slide Finish:

We offer a variety of different options for finishing/coating your slide after it has been milled. Please review the following options to see which best meets your tactical needs.

Unfinished (Media Blasted): Select this option if you wish to get it coated from another vendor. We media blast the slide with roughness to make it ready for coating. The slide will be shipped in an unfinished state not ready for operation. It is inadvisable to use the slide in this condition and may void your warranty if issues occur.

Black DLC: Slide will arrive with a coated solid black Diamond-like Carbon finish.

Battle Hardened Black DLC: Slide will arrive with our distressed black DLC finish with highlighted edges.

Satin Stainless Steel: Slide will arrive with a semi-polished, non-directional soft satin stainless steel finish (uncoated). Low reflectivity and a clean, uniform look set this premium finish apart from others while maintaining cosmetic longevity. Frequent cleaning and lubrication are required for this finish since there is no coating.

Cerakote: All other colors not identified above are achieved through Cerakote. Slide will arrive with a single color Cerakote coating of your choice offering unmatched corrosion, chemical and durability performance. Cerakote options cannot be combined to create patterns, camo, or battleworn finishes. If you need something more custom, we can provide the slide in an unfinished state for you to provide your coater.

Norsso standard slide features:

• Made with 17-4 Precipitation Hardened Stainless Steel
• Stripped slide only; sights, optics, or other accessories shown are not included with purchase

Norsso standard slide features:

• Made with 17-4 Precipitation Hardened Stainless Steel
• Stripped slide only; sights, optics, or other accessories shown are not included with purchase

For shipping/returns/warranty information click here. For special order policy information click here.