G26/27 Special Order Gen 3-5

$319.00
Made to Order:
6-8 weeks delivery
Share

Due to an overwhelming demand for special orders, we are pausing this service until our inventory is restocked. We appreciate your understanding while we continue to grow. Expansion plans are underway for more machinery and more output.  

G26/27 Slide availability

We have limited numbers of G26 Gen 5 and G27 slide blanks available. Place your order, and we'll make it to your specs.

Special Order Option

Our special order section allows you to put in an order for your slide the way you want it. Unfortunately we can't stock every option. With all of the optic cuts and design configurations we offer, it would take hundreds of slides to properly cover everything. Instead we bring special order capability. As a safely net we put 6-8 weeks delivery as the lead time. For in depth information for each slide design visit their respective web pages. We have more pictures of each as well.

Slide Blank Details

All slides are manufactured in house at Norsso and made with 17-4 Precipitation Hardened Stainless Steel.

Please read more about the advantages of 17-4 Stainless on our BLOG

Optic Milling Options

We offer optic milling options for several optics. Here are the details listed below of each.

Trijicon RMR - This is available with the dovetail in factory location or in front of the optic. Indexing posts are used to keep the optic zeroed if removed for battery change or to be used on another platform. We set our cowitness sight picture for lower 1/3. This gives more thread engagement to hold the optic onto the slide, and it allows you to see more of the optic window. Absolute cowitness can be achieved with taller sights if so desired.

Vortex Viper and Venom - Indexing posts are used for these optics to maintain sight zero if removed. The Venom optic is larger than the Viper. It requires the dovetail to be moved from the factory location to be in front. The Viper is installed in the conventional location or can be reversed depending on application. These optics are setup with lower 1/3 cowitness. 

Leupold Delta Point Pro - This milling option removes the rear dovetail. For cowitnessing with this setup you'll need the Delta Point Pro rear sight and the Ameriglo .407" front. Part number is GST 407.

Finish:

Finishing options are unfinished, black, and Battle Hardened.

Unfinished - slide will come uncoated. Before shipping we'll media blast the slide. From there you can cerakote or finish the slide as you want. Since we don't have to send out for coating, these slides will ship much faster.

Black - Slide will arrive black.

Battle Hardened - Battle hardening is distressed black. The black slide will be distressed highlighting the edges giving the slide instant character.  

Features:

  •  Optional optic milling configurations
  •  Pick the preferred slide design you want
  •  Finished in Black Nitride
  •  Slide is stripped without any internals, sights, barrels, or moving parts. Channel liner will be installed

G26/27 Special Order Gen 3-5 Reviews

Based on 3 reviews

G26 Gen4

Posted by Unknown on Dec 11th 2019

Ordered a G26 Reptile with RMR cut in distressed finish. Turn around time was great. The best looking slide work in my opinion. Functions great. Will be ordering a G19 slide in the future for sure.

Excellent fit and finish - worth the wait

Posted by A guy in New Mexico on Sep 21st 2019

I ordered a G27 slide with Gripper machining, no RMR cut and the "battle hardened" (distressed nitride finish); it arrived yesterday.

The machining was quite good; the outside surfaces looked impeccable, and I had to search very hard to find any tool marks inside some of the deep, high-aspect-ratio holes (e.g. extractor plunger channel). I really like the distressed nitride treatment.

All of the slide parts, with the exception of the sights (which I haven't installed yet) went in smoothly and easily. It was a little tight on a Polymer80 frame, but no obvious hangups or glitches when cycling. Snap caps cycled just fine; looking forward to taking it to the range.

Exceeded expectations

Posted by Eyad Daoud on Apr 17th 2019

I ordered a custom Gen 5 Glock 26 Reptile slide with an RMR cut. Not only was the turn around time super quick, the slide was incredible. It far exceeded my expectations with the look, function & quality. The Battleworn finish Just sets it off as well. Great job Norsso. My G19 is next when I can get some spare change in!