Check out our New @ Norsso section for fresh releases!

phone: 702.625.2001

PARTS

17 of 17 Items
  • Norsso SCS Cut Replacement Screws Norsso SCS Cut Replacement Screws Norsso SCS Cut Replacement Screws

    Norsso SCS Cut Replacement Screws

    Replacement screws compatible for mounting the Holosun SCS to a Norsso SCS Cut aftermarket slide. Includes two M3-0.5 thread 6mm long flat head torx screws. Drive size is Torx T10. Holosun recommended torque for mounting is 15 lb-in with medium/blue...

    $2.99
    Add to Cart
  • Norsso Trijicon RMR Cut Corrosion Resistant Screws

    Norsso Trijicon RMR Cut Corrosion Resistant Screws

    Ideal for heavy humidity and salt water environments, these are 316 Stainless Steel passivated screws for mounting the Trijicon RMR and Trijicon SRO to our slides. Using too long of a screw on the right side mount hole will cause malfunctions. One order...

    $3.99
    Add to Cart
  • Mounting Screws for Holosun 509T

    Mounting Screws for Holosun 509T

    Screws required to mount the 509T adapter plate to a Norsso aftermarket slide with a Trijicon RMR/Holosun 507C Optic cut. The shortened length is required to prevent interference with the extractor depressor rod bore. Includes three 6-32 x 3/16" Length...

    $3.99
    Add to Cart
  • NP10 Shortened Extractor Pins

    NP10 Shortened Extractor Pins

    Replacement spring pins for pinning the CZ P10 Extractor for use in Norsso slides. These pins are shorter to clear the optic mount surface. Includes two 2.5mm Diameter x 10 mm Length spring roll pins.

    $2.99
    Add to Cart
  • Norsso Vortex Cut Replacement Screws

    Norsso Vortex Cut Replacement Screws

    Replacement screws compatible for mounting the Vortex Venom or Viper to a Norsso aftermarket slide. Includes two #6-32 thread 5/16" long socket head cap screws. Socket drive head size is 7/64" Hex.

    $2.99
    Add to Cart
  • Norsso Optic Cover Plate Replacement Screws

    Norsso Optic Cover Plate Replacement Screws

    Replacement mounting screws compatible with the following Norsso Cover Plates: - NGLK-ELRMR-PLT - N320-RMR-PLT - N43-507K-PLT - NP10C-RMR-PLT Includes two M3 x 0.5 Thread 6mm long flat head screws. Socket head drive size is 2mm Hex.

    $2.99
    Add to Cart
  • Norsso Trijicon RMR Cut Replacement Screws

    Norsso Trijicon RMR Cut Replacement Screws

    Made with Black-Oxide Alloy Steel, these replacement screws are the ideal height for mounting the Trijicon RMR and Trijicon SRO to our slides. Using too long of a screw on the right side mount hole will cause malfunctions. One order includes a pack of...

    $2.99
    Add to Cart
  • CZ P-10C R2 RMR/507C Cut Cover Plate CZ P-10C R2 RMR/507C Cut Cover Plate

    CZ P-10C R2 RMR/507C Cut Cover Plate

    P10C R2 Cover Plates now available! Low profile RMR cover plates. Keep your slide looking sleek and professional even without an optic! CZ P10C R2 RMR cover plate features: Fits P10C R2 Norsso slides with a Trijicon RMR/Holosun 507C optic cut; other...

    $35.00
    Out of stock
  • N43 507K Cut Cover Plate N43 507K Cut Cover Plate G43 507k Cover plate 2

    N43 507K Cut Cover Plate

    Low profile cover plates! Keep your slide looking sleek and professional even without an optic! Norsso N43 507k cover plate features: Compatible with N43 Norsso slides with a Holosun 507k/RMSc Shield/Romeo Zero cut. Any other optic cuts...

    $35.00
    Add to Cart
  • P320 RMR/507C Cut Cover Plate P320 RMR/507C Cut Cover Plate P320 RMR/507C Cut Cover Plate

    P320 RMR/507C Cut Cover Plate

    Low profile RMR cover plates. Keep your slide looking sleek and professional even without an optic! P320 Trijicon RMR cover plate features: Fits P320 sub-compact, compact, and full-size Norsso slides with an RMR optic cut. Any other optic cuts are...

    $35.00
    Out of stock
17 of 17 Items

© 2024 NORSSO All rights reserved. | Sitemap